Tri-joint bracket shelf support

This is a shelf support exclusively for the Tri-Joint Bracket.
*Dedicated screws are sold separately.

POINT 1 Easy position adjustment with elongated holes
The position can be adjusted for each bracket, making it easier to level the shelf board.

POINT 2 Clean finish due to matching angles
The angles match those created by combining the Tri-Joint Bracket main units, so there's no need to bend the brackets.

Product Specifications

What is Tri-Joint Bracket?

An item that allows you to easily create wood stands by combining commercially available 2x4 lumber.

POINT 1 Easily create legs
You can easily create legs using 2x4 lumber.
The top board and other components can be combined as you like.

POINT 2 Excellent finish
Beautiful finish and detailed design, unique to Japanese manufacturing.
Also available in a wide range of colors to choose from.

POINT 3 Expand usage with ideas and ingenuity
Can be used in various ways depending on your ideas, such as workbenches, shelves, hanger racks, and umbrella stands.

Notes

● Load capacity is the measured value from our internal evaluation tests and is not a guaranteed value. The load capacity includes the weight of the wood used for the shelf board. This value was obtained using a 21mm thick, 330mm wide, 380mm long plywood board, 4 of these products, and 16 x 20mm dedicated screws (sold separately). Please note that sufficient performance may not be achieved depending on the installation location and the type of board attached.
● When using dedicated screws (sold separately), please use wood with a thickness of 20mm or more.
● Do not use the attached shelf board in a way that concentrates the load on one point.
● This product has sharp edges. Wear gloves when assembling.
● Do not use this product if it is deformed or damaged.
● Periodically check for abnormalities such as loose screws, and discontinue use if any abnormalities are found.
● Never step on or apply body weight to anything assembled using this product.
● Do not use in a way that applies impact.
● When attaching this product, be sure to screw it into all the screw holes provided in this product.
● This is a shelf support exclusively for the Tri-Joint Bracket (sold separately).
● Please read the instructions for use of the Tri-Joint Bracket (sold separately) carefully before use.
● Do not place fragile items or valuables on it.
● The thickness of the board material used as a shelf should be determined according to the length of the screws used.
● Avoid using in humid places or where water splashes directly.
● The specifications, dimensions, and packaging of this product may be changed without notice for improvement purposes.
● Always use all 4 of this product.